This page provides a short list of some Twin-Screw Extrusion publications. Most of these publications are issued from Cemef and they can be accessed from the user preferred publication database site.
Global presentation
|
|
|
|
Etude théorique du fonctionnement de l’extrudeur bi-vis |
J. Tayeb, B. Vergnes, G. Della Valle |
1987 |
Cuisson-Extrusion, p129, P. Colonna Ed. Presses de l’INRA |
A basic model for a twin screw-extruder |
J. Tayeb, B. Vergnes, G. Della Valle |
1989 |
Journal of Food Science |
A global Computer Software for Polymer Flows in Corotating Twin Screw Extruders |
B. Vergnes, G. Della Valle, L. Delamare |
1998 |
Polymer Engineering and Science |
Cuisson extrusion : quelques outils d’aide à la décision |
G. Della Valle, C. Barron, P. Colonna, B. Vergnes |
2000 |
Industries alimentaires et agricoles, 51-59 |
Extrusion : Procédés d’extrusion bivis |
B. Vergnes, M. Chapet |
2001 |
Techniques de l’Ingénieur, AM3 653, 1-23 |
Twin screw extruder simulation programs – What can they offer? |
2002 |
Plastics Additives & Compounding, Volume 4, Number 2, February 2002 , pp. 22-26 | |
Present challenges in the numerical modeling of polymer forming processes |
B. Vergnes, M. Vincent, Y. Demay, T. Coupez, N. Billon, J.F. Agassant |
2002 |
The Canadian Journal of Chemical Engineering, 80, 1143-1152 |
Modeling of coupling between specific energy and viscosity during twin screw extrusion of starchy products
|
F. Berzin, A. Tara, B. Vergnes, Ch. David
|
2009
|
ANTEC 2009
|
Reactive Extrusion
|
|
|
|
Etude expérimentale et modélisation de la transestérification d’un copolymère d’éthylène et d’acétate de vinyle par extrusion réactive |
F. Berzin, B. Vergnes
|
1997 |
Phénomènes de Transfert, Récents progrès en génie des procédés, Vol.11, n°53, Editions Tec et Doc, Lavoisier |
Etude expérimentale et modélisation d’une opération d’extrusion réactive |
F. Berzin |
1998 |
Thesis |
Numerical Analysis of a Reactive Extrusion Process – Part I: Kinetics Study on Grafting of Vinylsilane to Polyethylene – Part II: Simulations and Verifications for the Twin Screw Extrusion |
T. Fukuoka
|
2000 |
Polymer Engineering and Science
|
Polymerization of ε-Caprolactone in a Twin Screw Extruder |
A. Poulesquen, B. Vergnes, Ph. Cassagnau, J. Gimenez, A. Michel |
2001 |
Intern. Polymer Processing, XVI (2001) 1, p31-38 |
Carboxyl Terminated Polyamide 12 Chain extension by reactive extrusion using dioxazoline coupling agent part II: effects of extrusion conditions |
Y. Chalamet, M. Taha, F. Berzin, B. Vergnes
|
2002 |
Polymer Engineering and Science, 42, 2317-2327
|
Modification chimique de l’amidon par extrusion réactive |
A. Tara |
2005 |
Thèse |
Evolution of the Peroxide-Induced Degradation of Polypropylene Along a Twin-Screw Extruder : Experimental Data and Theoretical Predictions |
F. Berzin, B. Vergnes, S.V. Canevarolo, A.V. Machada, J.A. Covas |
2006 |
Journal of Applied Polymer Science, Vol 99, 2082-2090 |
Modeling of reactive systems in twin-screw extrusion : challenges and applications |
B. Vergnes, F. Berzin |
2006 |
Académie des Sciences, C.R. Chimie 9, 2006, 1409-1418 |
Computation of Starch Cationazation Performances by Twin-Screw Extrusion |
F. Berzin, A. Tara, L. Tighzert, B. Vergnes |
2007 |
Polymer Engineering and Science |
Residence Time Distribution
|
|
|
|
A new approach for modelling residence time distribution in a co-rotating twin-screw extruder |
A. Poulesquen, B. Vergnes, P. Cassagnau, A. Michel |
2001 |
Chimia, 55, 247-248 |
Un modèle prédictif pour la détermination de la distribution des temps de séjour en extrudeuse bi-vis |
A. Poulesquen, P. Cassagnau, A. Michel, B. Vergnes |
2001 |
Génie de la réaction chimique et des réacteurs, Récents progrès en génie des procédés, Vol 15, n°80, Editions Tec et Doc, Lavoisier |
Contribution à la modélisation de l’extrusion réactive en machine bi-vis |
A. Poulesquen |
2001 |
Thèse |
Optimization of processing conditions for polymer Twin-Screw Extrusion |
A. Gaspar-Cunha, A. Poulesquen, B. Vergnes, J.A. Cova |
2002 |
International Polymer Processing, 201-213 |
A study of residence time distribution in co-rotating twin-screw extruders. Part I : theoretical modelling |
A. Poulesquen, B. Vergnes |
2003 |
Polymer Engineering and Science, 43, 1841-1848 |
A study of residence time distribution in co-rotating twin-screw extruders. Part II : Experimental validation |
A. Poulesquen, B. Vergnes, P. Cassagnau, A. Michel, O.S. Caneiro, J.A. Covas |
2003 |
Polymer Engineering and Science, 43, 1849-1962 |
Polymers
|
|
|
|
Evolutions morphologiques d’un mélange de polymères incompatibles dans une extrudeuse bivis corotative |
L. Delamare |
1995 |
Thesis |
Computation of the morphological changes of a polymer blend along a twin-screw extruder |
L. Delamare, B. Vergnes |
1996 |
Polymer Engineering and Science, 36, 1685-1693 |
“La mise en forme des matières plastiques : approche thermomécanique” |
J.F. Agassant, P. Avenas, J.Ph. Sergent, B. Vergnes, M. Vincent |
1996 |
Editions Tec et Doc, Lavoisier, Paris |
Etude expérimentale et modélisation de la transesterification d’un copolymère d’éthylène et d’acétate de vinyle par extrusion réactive |
F. Berzin, B. Vergnes |
1997 |
Phénomènes de Transfert, Récents progrès en génie des procédés, Vol.11, n°53, Editions Tec et Doc, Lavoisier |
Transesterification of ethylene acetate copolymer in a twin-screw extruder |
F. Berzin, B. Vergnes |
1998 |
International Polymer Processing, 13, 13-22 |
A global Computer Software for Polymer Flows in Corotating Twin Screw Extruders |
B. Vergnes, G. Della Valle, L. Delamare |
1998 |
Polymer Engineering and Science |
Experimental and Theoretical Study of Twin-Screw Extrusion of Polypropylene |
O.S. Carneiro, J.A. Covas, B. Vergnes |
2000 |
Journal of Applied Polymer Science |
Modeling of Peroxide Initiated Controlled Degradation of Polypropylene in a Twin-Screw Extruder |
F. Berzin, B. Vergnes |
2000 |
Polymer Engineering and Science |
Numerical Analysis of a Reactive Extrusion Process – Part I : Kinetics Study on Grafting of Vinylsilane to Polyethylene – Part II : Simulations and Verifications for the Twin Screw Extrusion |
T. Fukuoka |
2000 |
Polymer Engineering and Science |
Peroxide-controlled Degradation of Ply(propylene) : Rheological Behaviour and Process Modelling |
B. Vergnes, F. Berzin |
2000 |
|
Experimental and Theorical Study of Polymer Melting in a Co-rotating Twin Screw Extruder |
B. Vergnes, G. Souveton, M.L. Delacour, A. Ainser |
2001 |
Conference Proceedings |
Modelisation de la fusion de polypropylène en extrusion bivis corotative |
G. Souveton, B. Vergnes, A. Ainser |
2001 |
Information, modélisation, simulation et optimisation, Récents progrès en génie des procédés, Vol 15, n°82, Editions Tec et Doc, Lavoisier, 121-128 |
Optimization of processing conditions for polymer Twin-Screw Extrusion |
A. Gaspar-Cunha, A. Poulesquen, B. Vergnes, J.A. Covas |
2002 |
International Polymer Processing, 201-213 |
Present challenges in the numerical modeling of polymer forming processes |
B. Vergnes, M. Vincent, Y. Demay, T. Coupez, N. Billon, J.F. Agassant |
2002 |
The Canadian Journal of Chemical Engineering, 80, 1143-1152 |
Evolution of the peroxide induced degradation of polypropylene along a twin screw extruder : Experimental data and theoretical predictions |
F. Berzin, B. Vergnes, S.V. Canevarolo, A.V. Machado, J.A. Covas |
2005 |
Wiley Interscience |
Effect on processing conditions on the formation of polypropylene/Organoclay Nanocomposites in a twin screw extruder |
W.Lertwimolnum, B. Vergnes |
2006 |
Polymer Engineering and Science |
Optimization of Extrusion Parameters for Preparing PCL-Layered Silicate Nanocomposites Supported by Modeling of Twin Screw Extrusion |
N. Watzeels; K. Van Durme; H.E. Miltner; C. Block; G. Van Assche; B. Van Mele; B. bogdanov, H. Rahier |
2013 |
Macromolecular Materials and engineering |
Influence of extrusion conditions on fiber breakage along the screw profile during twin screw compounding of glass fiber_reinforced PA 2013 |
J.Ville; F. Inceoglu; N. Ghamri; J.L. Pradel; A. Durin; R. Valette; B. Vergnes |
2013 |
Intern. Polymer Processing, XXVIII (2013) |
Food Industry
|
|
|
|
Flow of a molten starch through the reverse flight element of a twin screw extrusion cooker |
J. Tayeb, B. Vergnes
|
1988 |
Rheol. Actu, 440
|
A basic model for a twin screw-extruder |
J. Tayeb, B. Vergnes, G. Della Valle |
1989 |
Journal of Food Science |
Recent developments in modeling twin-screw extrusion cooking |
C. Barrès, B. Vergnes |
1990 |
Processing and quality foods, Vol1., Elsevier, London |
An improved thermal model for the solid conveying section of a twin-screw cooker-extruder |
C. Barrès, B. Vergnes, J. Tayeb |
1991 |
Journal of Food Engineering, 15, 167 |
Computation of residence time and energy distribution in the reverse screw element of a twin-screw extruder-cooker |
C. Barrès, B. Vergnes, J. Tayeb |
1992 |
Journal of Food Engineering, 16, 215 |
Simulation of transport phenomena in twin-screw extruder
|
J. Tayeb, G. Della Valle, C. Barrès, B. Vergnes
|
1992 |
Food Extrusion : Science and Technology, p 41-70, J.L. Kokini,C.T. Ho, M.V. Karwe. Ed Marcel Dekker, New York |
Computer simulation of starchy products transformation by twin-screw extrusion |
G. Della Valle, C. Barrès, J. Plewa, J. Tayeb, B. Vergnes |
1993 |
Journal of Food Engineering, 19, 1-31 |
Influence of amylose content on the viscous behavior of low hydrated molten starches |
G. Della Valle, P. Colonna, A. Patria, B. Vergnes
|
1996 |
J. Rheol.
|
Relations between rheological properties of molten starches and their expansion behaviour in extrusion |
B. Vergnes, G. Della Valle, P. Colonna, A. Patria |
1997 |
Journal of Food Engineering |
The extrusion behaviour of potato starch |
G. Della Valle, Y. Boché, P. Colonna, B. Vergnes |
1995 |
Carbohydrate Polymers |
Extrusion of Wheat Gluten Plasticized with Glycerol : Influence of Process Conditions on Flow Behaviour, Rheological Properties and Molecular Size Distribution |
A. Redl, M.H. Morel, J. Bonicel, B. Vergnes, S. Guilbert |
1999 |
Cereal Chemistry, 76, 361-370 |
Rheological Properties of biopolymers and application to cereal processing |
B. Vergnes, G. Della Valle, P. Colonna |
2003 |
Characterization of cereal and flours : properties, analysis and applications, G. Kaletunc, K. Breslauer eds, Marcel Dekker, New-York, 209-265 |
Computation of Starch Cationazation Performances by Twin-Screw Extrusion |
F. Berzin, A. Tara, L. Tighzert, B. Vergnes |
2007 |
Polymer Engineering and Science |
The effect of Wheat and Maize Flours Properties on the expansion Mechanism during Extrusion Cooking |
A. Arhaliass, J. Legrand, P. Vauchel, F. Fodil-Pacha, T. Lamer, J-M. Bouvier |
2007 |
Food Bioprocess Technol |
Extrusion Studies of Aquaculture Feed using Distillers Dried Grains with Solubles and Whey |
N. Chevanan, K. Muthukumarappan, K. A. Rosentrater |
2007 |
Food Bioprocess Technol |
Extrusion Structure and Mechanical properties of complex starchy foams |
F.Robin; J. Engmann; N. Pineau; H. Chanvrier; N. Bovet; G. Della Valle |
2010 |
Journal of Food Engineering |
Thermo-mechanic problematics
|
|
|
|
Modélisation thermo-mécanique du procédé d’extrusion bi-vis; exemples d’applications |
J. Tayeb, G. Della Valle, B. Vergnes |
1994 |
La cuisson-extrusion, p489-536, P. Colonna, G. Della Valle Eds, Lavoisier, Paris |
Modelisation de la fusion de polypropylène en extrusion bivis corotative |
G. Souveton, B. Vergnes, A. Ainser |
2001 |
Information, modélisation, simulation et optimisation, Récents progrès en génie des procédés, Vol 15, N°82, Editions Tec et Doc, Lavoisier, 121-128 |
Process optimization
|
|
|
|
Optimization of processing conditions for polymer Twin-Screw Extrusion |
A. Gaspar-Cunha, A. Poulesquen, B. Vergnes, J.A. Covas |
2002 |
International Polymer Processing, 201-213 |
Scale Up
|
|
|
|
Twin screw extruder simulation programs – What can they offer ? |
M. Holmes |
2002 |
Plastics Additives & Compounding, Volume 4, Number 2, February 2002 , pp. 22-26 |
Pharmaceutical
|
|
|
|
Rational Development of Solid Dispersions via Hot-Melt Extrusion Using Screening, Material Characterization, and Numeric Simulation Tools |
D.E. Zecevic; K.G. Wagner |
2013 |
Wiley Online Library DOI 10.1002/jps.23592 |