Tag Archives : Twin Screw Extrusion


Twin Screw Course Pharma Edition

SC-Consultants organizes a Twin Screw Course Pharma Edition dedicated to solve industrial Hot Melt Extrusion issues within the numerical simulation. This 2-day course takes place in Bonn, (Germany) on October 5-6, 2016.   The content of the event During two days, enjoy a complete program with: a reminder about the extrusion mechnisms and hands on […]

tsc-bonn

Figure 3

Scale-up challenge in reactive extrusion and compounding processes: 1D numerical simulation as a powerful tool

Reactive extrusion … is more and more used for compounding high performance polymers which have complex formulations that imply potential compatibilization issues. Therefore, using twin-screw extruder (TSE) as a continuous reactor in which chemical reactions facilitating the compatibilization is a solution. The main issue could turn up when passing from a well-controlled formulation at lab scale […]


Twin Screw Course America and Europe 2015

After the success of the first Twin Screw Course (TSC) Europe, organized on the French Riviera, SCC is proud to announce two upcoming TSC: the TSC America 2015, located in UMass Lowell (Lowell, MA, USA) on October 7th and 8th and the TSC Europe 2015, located on the French Riviera, on December 2nd and 3rd, […]


Article#6 fig3

Predicting the reaction rate in a twin screw extruder

Twin screw extruders (TSEs) are widely used in chemical polymer modification or polymerization. Indeed, TSEs are continuous chemical reactors proposing an important mixing capability, even with highly viscous polymers. Their flexibility in the screw design and control of temperature is an asset for processing chemical reaction as they allow to control and favor residence time […]


Article #5 Fig 3

PP Peroxide-Induced Degradation: predicting the material behaviour

Polypropylene (PP) when polymerized exhibits a high molecular weight (MW) and, consequently, high viscosity, which might be tricky for its processability. To improve this latter, MW can be tailored by different degradation methods. One of the most popular is the degradation of the PP induced by peroxide, because it is a straightforward and cost-effective approach. […]


Processing wood fibres in twin screw: interest of the numerical simulation

Processing wood fibres in a twin screw extruder is challenging as it requires a close control of the temperature and mixing efficiency: temperature has to be limited for avoiding burning the wood fibres mixing efficiency has to be important enough to disperse the fibres into the polymer matrix For a first analysis of the process, […]

Screw profile used for the experiments